imageimage Комплексные поставки оборудования и инжиниринг +7 (495) 668-13-58
пн-пт 8:15-18:30inbox@itmash.ru
Развернуть текстовую область
                                                                                Для заявок - dmc@itmash.ru

Standard Adjustable Crimp Tool

UPPER RANGE CRIMP                             The precision ratchet controls cycling      The adjustable head (P/N UH2-5) is
TOOL AF8 M22520/1-01                       of the tool in both directions of handle    ideally suited for lab work and prototype
                                           movement. This assures the same             production applications. This head
   The DMC AF8, qualified to MIL-          accurate crimp every time. It’s like        is attached in the same manner as
DTL-22520/1*, has virtually limitless      having a quality control inspector at       explained above. The selected contact
application within the specified wire      every work station.                         is inserted through the entry hole on the
range of 12 through 26 AWG. Over                                                       opposite side of the tool frame from the
a thousand turret heads are available         Positive crimp depth is controlled by    head. The height adjusting screw is then
to adapt the tool frame to your specific   an 8 position selector knob conveniently    rotated until the contact is in the proper
military or proprietary contact/wire       located on the tool frame. The operator     position for crimping. The screw can
combination. The 8 impression crimp,       simply dials the desired step for the wire  be secured with the locknut provided.
which is standard in the AF8, assures      being used. This setting can be secured     Some testing will be necessary to
absolute maximum tensile strength with     by use of a locking pin or safety wire.     determine the optimum selector setting
almost every closed barrel contact.                                                    for your contact/wire combination.
Special indent configurations and gaging      The carefully engineered design
are available upon request.                achieves the absolute maximum                  The AF8 is approximately 934" x 212" x
                                           mechanical advantage and the tool’s         114" and weighs 15 oz.
   For proper operation, the tool must     light weight helps minimize operator
be mated with one of the following         fatigue.
optional accessories: a military standard
or non-military turret head (TH-XXX           A permanent dataplate is affixed to all
Part No. Series), a military standard or   turret heads and positioners. This plate
non-military positioner (TP-XXX Part No.   lists specific contact part numbers, the
Series), or an adjustable head (Part No.   corresponding position color code (for
UH2-5). This is done simply by orienting   3 position turret heads), and suggested
the head in the keyed position, and        selector depth settings for the wire size
by tightening the hex socket screws        being used.
provided as part of the head.

* Change to SAE AS22520 in process consult DMC for status.

PAGE 6                                                         www.itmash.ru
                                                              dmc@itmash.ru
                                                            +7 (495) 668-13-58

Нажмите
для заказа
Заявка
Вам перезвонят